Creston Mounting Hardware

TSW-UMB-70

The Crestron® TSW‑UMB‑70 universal mounting bracket provides a simple in‑wall mounting solution for TSW‑570, TSW‑770, TSW‑1070, TSS‑770, and TSS‑1070 series touch screens. The TSW‑UMB‑70 is also compatible with TSW‑570P series touch screens when mounted in portrait orientation.

By itself, the TSW‑UMB‑70 is a postconstruction solution that allows the touch screen to be retrofitted into existing drywall or paneling. The bracket is also suitable for use in a lectern or podium. Because the TSW‑UMB‑70 fits all supported touch screen models, a touch screen can be replaced easily without needing to cut or patch the wall.


TSW-UMB-70-BBI

The Crestron TSW‑UMB‑70‑BBI provides a wall-mounted metal back box for TSW‑570, TSW‑770, TSW‑1070, TSS‑770, and TSS‑1070 series touch screens. The TSW‑UMB‑70‑BBI is also compatible with TSW‑570P series touch screens when mounted in portrait orientation.

The TSW‑UMB‑70‑BBI is designed to be used along with the TSW‑UMB‑70 universal mounting bracket and allows the touch screen to be installed in concrete walls or masonry. Conduit knockouts are provided on the top, bottom, and sides of the back box to run cables to the touch screen.


TSW-1060-TTK-B-S

The TSW-1060-TTK provides a stylish and convenient tabletop enclosure for a TSW-1060 Touch Screen. The touch screen is angled when installed in the enclosure. The complete assembly may be placed on any flat, level surface.

An optional swivel mount accessory (TSW-560/760/1060-SMK) is available separately and provides a means for permanently mounting the enclosure while retaining the ability to rotate it for optimal positioning. The swivel range can be customized using optional limit screws, with a maximum of 330-degree rotation allowed. The swivel mount may be installed on any flat table, desk, or counter top surface with a thickness of 1 inch (25 mm) minimum to 1 3/8 inch (35 mm) maximum.

TSW-1060-TTK-B-S Key Features

  • Converts a TSW-1060 to a stylish 10.1” tabletop touch screen
  • Provides a 38° fixed operating angle
  • Allows permanent mounting using the optional swivel mount kit 
  • Provides the choice of a rear or bottom wire exit

TSW-760-TTK-B-S

The TSW-760-TTK provides a stylish and convenient tabletop enclosure for a TSW-760 Touch Screen. The touch screen is angled when installed in the enclosure. The complete assembly may be placed on any flat, level surface.

Wiring may be passed out the rear of the enclosure through a grommet and strain relief, or routed through the bottom for a very clean, cordless appearance. The rear wire opening can accommodate a single cable up to 1/4 inch (6 mm) diameter such as standard CAT5. The bottom opening measures 29/32 inch (23 mm) diameter, while the swivel mount can accommodate wiring up to 11/16 inch (17 mm) diameter.

TSW-760-TTK-B-S Key Features

  • Converts a TSW-760 to a stylish 7” tabletop touch screen
  • Provides a 38° fixed operating angle
  • Allows permanent mounting using the optional swivel mount kit
  • Provides the choice of a rear or bottom wire exit